Triple-R 1000 with Beacon

High-efficiency 11W LEDs with a 5000K colour temperature and 80CRI deliver maximum sharpness, definition, and long-range visibility.

Integrated amber flashing beacon function – 16 flash patterns (UNECE Reg65 (XA1 approved)

Integrated white and amber position light function (UNECE Reg148 approved – white only)

Gradual brightening and smooth colour transitions available via dynamic start-up/welcome mode.

Ultra-reflective vacuum-metallised optics deliver spot beam pattern

UNECE Reg 149 Class B Driving Light, approved for on-road high beam (Dual-output technology via flash-to-dim)

Includes versatile ‘Centre Mount’ mounting system plus integral features to enable side mounting (brackets sold separately)

Electronic thermal management system optimises light output to preserve longevity of the LEDs

Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection

CAE optimised heatsink offers improved thermal dynamics

Over voltage and reverse polarity protected

‘Unbreakable’ polycarbonate lens with hardcoat lacquer

UNECE approved Reg 10

IP68 watertight

5-year warranty

Supplied with pre-wired male/female 6-pin Superseal connectors

Designed & manufactured in the UK

Technical Specifications
1x TRIPLE-R 1000 BEACON

BOOST
MODE

LOW OUTPUT/
E-MARK MODE

   
Voltage Range (DC) 10-32V
LED Life 50,000 hours
Weight 1.7kg
 
HIGH BEAM FUNCTION
Total Luminous Flux 9,240 Lm 1,848 Lm
Total Driver 'FOV' Flux † 5,572 Lm 1,114 Lm
Colour Temperature 5000K
Power Consumption 88 Watts 17.6 Watts
Peak Current Draw 7.2 Amps 0.88 Amps
Current Draw (14.4V) 6.1 Amps 0.74 Amps
Connector 6-Pin Superseal (+25cm Cable)
 
DIMENSIONS
Width 410mm
Depth 105mm
Height 73mm
 
CERTIFICATION
IP Rating # IP68
High Beam (E9 approval) ECE R149 - Ref: 12 .5 (in Low Output Mode only)
Position Light (white only) ECE R148
Beacon Function ECE R65 (XA1)
EMC Certification ECE R10
Salt Spray Test ISO 9227
Dump Load Protection ISO 7637-2
 
PHOTOMETRIC DATA
Horizontal / Vertical Beam Angle 28° / 16°
0.25 Lux 1225m 548m
0.5 Lux 866m 387m
1 Lux 612m 274m
3 Lux 354m 158m
 

 

† - Driver FOV flux is a measure of effective lumens taking consideration of the amount of light in a driver's 'field-of-view' defined as an area +/- 45° left/right, and +/- 10° up/down. For more information – click here.

# - All Lazer products are designed to meet the requirements of IP68 testing. Every lamp produced at our UK facility is fully submerged under water prior to sending out.

What's Included
  • x1 Triple-R 1000 LED Lamp with Beacon Function
  • x2 Centre Mount (1114k)
  • x1 Installation Instructions
Downloads

CLICK BELOW TO DOWNLOAD (OPENS PDF IN NEW WINDOW)

Videos
Write Your Own Review
You're reviewing:Triple-R 1000 with Beacon
Your Rating

Triple-R 1000 with Beacon

Product Code
#00R8-BCN

From £504.00

To £669.60

Triple-R 1000 with Beacon

In stock

Find a
Stockist

£504.00

The Triple-R Beacon is engineered for heavy trucks, LCVs, utility vehicles, and fleet operators requiring a consolidated high-performance lighting and signalling solution. Combining the long-range illumination capability of the Triple-R platform with integrated beacon and position light functionality, the lamp is designed for demanding operational environments where enhanced visibility and signalling integrity are essential.

Each unit comprises high-efficiency 11W LEDs, operating at a 5000K colour temperature carefully selected for visual clarity, sharpness, and comfort (especially when used for prolonged periods of time). The optical system delivers a pleasant balance of focused long-range beam with good left/right spread of light, and a slightly increased vertical spread, ensuring the suitability of the lamps to both high and low mounting positions on your vehicle.

The Beacon functions are UNECE Regulation 65 approved as a narrow-field, night-limits, (XA1) beacon light, with 16 different amber warning light patterns which can be selected and synchronised (between multiple lamps), at the point of installation, or using a momentary switch where the requirement is to change the flash pattern on demand.

Incorporating integrated white and/or amber position light, this function is able to be selected at the point of installation (or switchable if wired accordingly), with the white position light fully UNECE approved to Regulation 148 for on-road use. It can also be configured with a dynamic start-up/welcome mode; either a gradual brightening, or smooth transition between white and amber (or vice versa), when the vehicle is started or the side lights are activated.

The lamp is also UNECE approved to Regulation 149 as a high beam driving light, through adoption of Lazer’s dual output Boost technology; controlled via quickly flashing the light off/on, the light can be quickly dimmed for avoiding glare when passing road-signs for example (flash-to-dim), or at any time programmed to always work in the high or low output modes, with the low output mode complying to the UNECE Reg149 as an on-road high beam driving light.

Like all Lazer high performance lights, the Triple-R range is designed, engineered, and built in-house, in our UK premises, you can be fully assured of exceptional high-end product design, coupled with superior levels of illumination, all backed up by our comprehensive 5-year warranty.

 


Lamps produced before Q3'25 (with a serial number of 25341551 or lower) will use a physical Boost Cap in the side of the lamp for controlling the output level. Please refer to your instructions included with the lamp for details.

PAYMENT & DELIVERY INFORMATION

Please note all transactions are completed in GBP:

Paypal / Visa / Mastercard / AmexSecure Payment

DELIVERY – UK CUSTOMERS

Van icon

Goods will be shipped via courier within 1 working day of your order being placed (stock permitting). At the checkout stage you will be given Standard (£10 ex VAT) or Express (£20 ex VAT) shipping options. For more information visit our Delivery Information page.

DELIVERY – EUROPE & REST OF THE WORLD

Global delivery symbol

Goods will be shipped via Express courier service within 2 working days of your order being placed (stock permitting). Goods are typically sent DAP (Delivered At Place) meaning you will be liable for country specific VAT, import duties, and courier disbursement fees. For more information please visit our Payment Terms page. To avoid unnecessary charges, we would encourage customers to consider buying from a local dealer. For a full list of countries we ship to, plus service levels and prices, please visit our Delivery Information page.

Lazer Lamps Ltd © 2026.   VAT number: GB992466082.    Company reg. number: 07247056.