Made in the UK
Carbon-6 Spot (Yellow Dip)
Ultra-lightweight, PC-ABS material housing
Combination of premium-bin, high intensity LEDs
Available with Spot or Drive optics
Full-beam mode and secondary low/dipped beam mode
Yellow Low/dipped beam mode, optimised for snow/fog/dust conditions, or to prevent glare off road signs during road stage events.
Lamp features Dual-output functionality – High and Low output modes, with the low output mode approved to UNECE Reg 149 Class RA Supplemental Driving Light
Carefully selected 5000K colour temperature maximises sharpness and definition
White and Amber backlight function
CAE-optimised heatsink requires minimal airflow to maintain 100% light output
Dynamic drive modulation preserves electronic components in adverse conditions
Low profile, edge-to-edge design for improved aerodynamic performance
Lamp features a built-in DT04-4P Deutsch Connector (gold plated solid DT contacts)
Vehicle side connector, plus 150mm cable length supplied with each lamp
‘Unbreakable’ polycarbonate lens
Range of black and white lens covers available
IP68 watertight
5-year warranty
Designed & manufactured in the United Kingdom.
† - Driver FOV flux is a measure of effective lumens taking consideration of the amount of light in a driver's 'field-of-view' defined as an area +/- 45° left/right, and +/- 10° up/down. For more information – click here. # - All Lazer products are designed to meet the requirements of IP68 testing. Every lamp produced at our UK facility is fully submerged under water prior to sending out. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Carbon-6 Spot (Yellow Dip)
From €500.00
To €590.00
Carbon-6 (Yellow Dip) takes one of Lazer’s most iconic motorsport lamps and makes it even more versatile. Engineered for drivers who operate in unpredictable and demanding conditions, the addition of the yellow dipped beam enhances visibility where white light struggles. In contrast, the white high beam continues to deliver uncompromising performance. Sitting alongside the existing Carbon-6 products, Carbon-6 (Yellow Dip) gives drivers the freedom to choose the solution best suited to their environment.
Available with SPOT or DRIVE optics, each lamp operates in three modes:
- HIGH BEAM – BOOST MODE (100% output)
- DIP BEAM (yellow light output, aimed lower)
- HIGH BEAM – REDUCED OUTPUT (25% output, UNECE 149 compliant)
The lamp also features an integrated backlight with white and amber colour options. The backlight colour can be selected at any time after installation by flashing the backlight on and off a pre-set number of times. Repeating the same on/off sequence allows the user to switch back to the other backlight colour.
UNECE 149 approval applies to the lamp when operated in low output (25%) mode, with the light programmable between on-road compliant output and high-output boost mode. Programming is achieved by flashing the lamp on and off a pre-set number of times prior to use. The same sequence can be used to re-activate boost mode when the lamp is used off-road or in regions where output levels above UNECE R149 are permitted.
The lamp housing is manufactured from high-strength, heat-resistant PC-ABS material, while thermal control is managed via a CAE-optimised anodised aluminium element, ensuring consistent LED performance in demanding environments. Weighing just 400g, the lamp maintains an excellent strength-to-weight ratio, while dynamic drive modulation protects internal electronics under extreme thermal and environmental conditions.
As with all Lazer products, the Carbon-6 lamps have been designed, engineered, and are manufactured in-house, in the UK. There is no compromise in regards component parts, or build processes to achieve a superior product. In addition to the lamps themselves, a black lens cover is included to provide protection during daytime use.
PAYMENT INFORMATION
Please note all transactions are completed in Euros:
If you plan to reclaim VAT on any purchase and require a VAT receipt from your specific country, you will need to instead purchase through one of our local distributors.
DELIVERY – EU CUSTOMERS
Goods will be shipped via courier within 2 working days of your order being placed (stock permitting), from Lazer Lamps’ warehouse in Belgium. At the checkout stage you will be given the option for Standard or Express shipping options. For more information visit our Delivery Information page. For lower cost, expedited deliveries, with country-specific VAT receipts, we would always encourage purchases to be made through one of our local distributors.
DELIVERY – EUROPE & REST OF THE WORLD
Please visit www.lazerlamps.com for deliveries required outside of the EU.
